Factory wholesale Finished Tubing Parts - UHP tubes – Dextube Detail:
Product Details:
Process Method: Cold Drawn / Cold Roll& Bright Annealed & Electro polished
Available Material:
TP304L, TP316L, TP316L-S2, EN 1.4301, EN 1.4404, EN 1.4435, other grades can be offered on request.
Elements | 304L | 316L | 316L-S2 |
( C ) Carbon – max | 0.035 | 0.035 | 0.035 |
(Mn) Manganese-max | 2.00 | 2.00 | 2.00 |
(P) Phosphorus-max | 0.045 | 0.045 | 0.045 |
(S) Sulphur | 0.03 | 0.03 | 0.005-0.012 |
(Si) Silicon-max | 1 | 1 | 1 |
(Ni) Nickel | 8.0-12.0 | 10.0-14.0 | 10.0-14.0 |
(Cr) Chromium | 18.0-20.0 | 16.0-18.0 | 16.0-18.0 |
(Mo) Molybdenum | N/A | 2.0-3.0 | 2.0-3.0 |
Standards: ASTM A269, EN 10216-5 TC1
Outside diameter range from 6.35-50.8mm
Wall thickness range from 0.71-2.77mm
Inner surface roughness can be according to customers’ request and reach up to Ra<0.2μm
Applicable industries:
Semiconductor, TFT/LCD,
Gas/Bio/Medical Equipment
Features:
Selected Raw Materials:Our tubes are manufactured from specially selected mother pipes, controlled lower content of sulfur levels to promote reliable, consistent welding.
Chemically And Ultra High Purity/UHP Cleaned: Our tubes are chemically cleaned and passivated to keep nonvolatile residue levels to comply with ASTM G93 or SEMI E 49.6. UHP tubes &pipes are rinsed with 18MΩ cm2 DI hot water and purged with 99.9995% filtered nitrogen and are packed in an class 10 clean room.
Traceability and Clean Packaging: Each tube is marked to identify manufacturer, material type and heat code. BA&EP grade tubes & pipes are packed as following manner: ends are faced and protected with polyamide nylon film and polyethylene caps, packed in single (BA grade) or double (EP grade) polyethylene bags.
Professional Inspection Equipment: We have a variety of professional inspection equipment: Scanning Electron Microscope(SEM),Energy Dispersive Spectroscopy(EDS), Surface Roughness Gauge, Particle Counter, Micro Vickers, Moisture Analyzer, Metallographic Microscope, Tensile Testing Machine etc.
Product detail pictures:



Related Product Guide:
High-tech filter maker opening new factory at Bangor Innovation Center — Business — Bangor Daily News — BDN Maine | Stainless Steel Bending Tube
High-tech filter maker opening new factory at Bangor Innovation Center — Business — Bangor Daily News — BDN Maine | Stainless Steel Bending Tube
With our rich experience and considerate services, we have been recognized as a reliable supplier for many international buyers for Factory wholesale Finished Tubing Parts - UHP tubes – Dextube, The product will supply to all over the world, such as: Indonesia , Sri Lanka , Croatia , Be sure to feel cost-free to send us your specs and we are going to respond for you asap. We have got a experienced engineering team to serve for the every single comprehensive needs. Free samples may be sent for yourself personally to know far more facts. So that you can meet your desires, please actually feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.

This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.

-
Special Design for Seamless Coiled Tubing - Pn...
-
Chinese Professional Semiconductor Stainless Tu...
-
Best quality Honed Steel Tube - Heat Exchanger...
-
Professional Design Seamless Stainless Steel Tu...
-
OEM Customized Monel 400 Tube - Stainless Stee...
-
Cheapest Factory Stainless Steel Bending Tubing...